Tarragona, July 20, 2016 – A new “ABS 3D printing” R&D project initiated by specialty ABS producer ELIX Polymers aims to develop advanced versions of the terpolymer specifically for 3D printing using Fused Filament Fabrication (FFF), more commonly known as Fused Deposition Modelling (FDM). ELIX’s aim is to create materials that will produce parts with better mechanical properties such as resistance to impact, low warpage, dimensional precision and high resolution.
Related Posts
Fakuma
More than 1800 exhibitors will present their international offerings on the world’s leading technical event for industrial plastics processing. Fakuma will take place in Friedrichshafen Exhibition Centre from 16 to 20 October 2018.
Attention will be focused on the latest technologies which promise highly advantageous benefits, as well as processes and tools for efficient plastics processing by means of injection moulding, extrusion, thermoforming and 3D printing.
The Revolutionary Past of Plastics
by Plastics.com Staff | June 11, 2019 | All Processes, All Regions, Daily News, Plastics Training/Education | 0 Comments
Essentra Extrusion Sold To Inter Primo In EUR16 Million Deal
by Plastics.com Staff | June 11, 2019 | Business, Daily News, Extrusion, Mergers & Acquisitions | 0 Comments
A ‘cast PU elastomer’ that can be injection moulded
by Plastics.com Staff | June 11, 2019 | Daily News, Injection Molding, Performance Plastics | 0 Comments
Plastic straws rank low among consumer concerns
by Plastics.com Staff | June 7, 2019 | Consumer, Daily News, Environmental, Extrusion | 0 Comments
Is Milacron Holdings Corp (NYSE:MCRN)’s Fuel Running Low?
by Plastics.com Staff | June 7, 2019 | Business, Daily News, Global | 0 Comments
Single-ion conducting polymer electrolytes
by Plastics.com Staff | June 7, 2019 | Daily News, Polymer Science | 0 Comments
Functional Natural and Synthetic Polymers
by Plastics.com Staff | June 6, 2019 | Daily News, Polymer Science | 0 Comments
New Frontiers for Recyclable Polymers
by Plastics.com Staff | June 6, 2019 | Daily News, Environmental, North America, Polymer Science, Recycling | 0 Comments
Krauss-Maffei Corp. president Paul Caprio stepping down
by Plastics.com Staff | June 6, 2019 | Business, Daily News, Profile | 0 Comments
Prodways Begins Work on Autonomous Dental 3D Printing
by Plastics.com Staff | March 25, 2019 | Additive Mfg, Consumer, Daily News, Europe, Part Design | 0 Comments